Sequential Turn Signal Lights for Mercedes-Benz W205 W213 W222 X253
Upgrade your Mercedes-Benz with these anzulwang sequential LED turn signal lights engineered for the W205, W213, W222, X253, and W447 platform vehicles. Replacing outdated factory repeaters with these dynamic side mirror flashers delivers a smooth, forward-scanning amber animation that immediately communicates your lane-change intent to surrounding traffic. Built with 2400LM LED arrays housed in impact-resistant ABS casings, the system runs on a straight 12V circuit with only 5W draw, matching or exceeding OEM luminosity while staying highly power-efficient. Direct socket replacement eliminates the need for CANbus decoders, resistors, or software coding, preventing dashboard error messages and allowing a clean retrofit on C-Class, E-Class, S-Class, GLC-Class, and V-Class sedans, coupes, and SUVs.
Practical Benefits & Installation Tips
- The primary amber segment activates as a conventional dynamic turn signal through a straightforward plug-and-play connector, requiring zero programming for immediate operation.
- If your vehicle features puddle lamps or motorized mirror folding, tap the secondary blue accent circuit into those dedicated power lines to activate the full color-scroll sequence.
- When auxiliary door harness circuits are absent, route the unused leads away with insulating tape or trim the green pair to operate the yellow indicators independently without triggering system faults.
Technical Specifications
- Voltage: 12V DC | Power Draw: 5W per repeater
- Light Output: 2400 lumens with amber-forward dynamic sequencing
- Housing Material: Durable ABS polymer lens with corrosion-resistant internals
- Weather Protection: Fully sealed construction rated for continuous rain and wash-down exposure
- Fitment: Direct OEM drop-in for W205 (C-Class), W213 (E-Class), W222 (S-Class), X253 (GLC-Class), W447 (V-Class) 2014–2018
What Is In The Box
- 2× Sequential Side Mirror Turn Signal Repeaters (left and right)
Setup Reminders
Verify your exterior mirror body contour against the product reference images prior to unboxing, as facelift iterations occasionally alter mounting brackets. Minor dimensional variance may occur due to manufacturing tolerances, which typically does not affect bolt-on alignment. Keep connectors elevated from standing water traps along the door edge during heavy seasonal precipitation. All electronic and mechanical equipment, devices and machines sold by InterCyprus to EU countries are CE certified and carry a two year warranty. Providing consistent automotive solutions and trusted service since 2002 at intercyprus.com.