Domov » Dynamic Sequential LED Turn Signals for BMW E46 E90 E92

Dynamic Sequential LED Turn Signals for BMW E46 E90 E92

SKU: 1005013041947237-Clear lens
Emitting Color
€43,24
-37% €69,18 €43,24

Replace aging factory lamps with these Dynamic Sequential LED Turn Signals engineered specifically for BMW sedans, coupes, wagons, and convertibles. Built around high-output 2400LM SMD LED chips housed in rugged plastic casings, each unit delivers a smooth forward-chasing motion that significantly improves lateral visibility while keeping your vehicle’s original styling intact. The 5-watt, 12V direct-current draw operates seamlessly within your car’s electrical architecture, eliminating classic aftermarket bulb-out warnings or CANBUS errors. Designed as a drop-in replacement for T10 (W5W/194) sockets, this plug-and-play kit requires zero wiring splices, resistor installations, or module programming. With over 50,000 hours of rated lifespan and factory-sealed waterproofing, these amber side markers handle daily highway commutes and winter road salt without flickering or premature failure. Compatible across extensive model ranges including the E90/E91/E92/E93 3 Series, E60/E61 5 Series, E82/E88 1 Series, and E46 M3, this upgrade bridges modern safety signaling with effortless OEM integration.

Benefits & Practical Tips

  • The progressive sequential blink pattern cuts through daytime glare and nighttime darkness far better than standard flashers, giving following drivers clearer distance cues during lane changes.
  • Confirm your dashboard warning system stays silent; the optimized low-resistance load matches BMW factory diagnostics, so you will never see a malfunction indicator light after installation.
  • For optimal sealing against moisture and debris, align the unit flush with the grille or bumper cutout and gently secure using double-sided automotive tape or factory clips instead of drilling new holes.

Technical Specifications

  • Interface Standard: T10 (W5W/194)
  • Operating Voltage: 8V–15V DC
  • Power Draw: 5W per lamp
  • Luminous Flux: 2400 lumens
  • Color Temperature: 6000K–6500K (Amber)
  • Housing Material: Impact-resistant thermoplastic
  • Average Lifespan: >50,000 hours
  • Weight: 130g per pair
  • Supported Language: English

Package Includes

  • 2 x Dynamic Sequential LED Side Marker/Lamp Units (1 Complete Set)

Warnings & Reminders

Connect strictly to 12V DC circuits; higher voltage sources will permanently damage the SMD driver board. Do not modify or pierce the sealed plastic housing, as compromising the enclosure voids its water resistance and may cause short circuits. Handle LED chips by the plastic frame only to prevent static discharge or coating scratches. Always test connectivity in a safe parking area before securing mounts under vibration-prone driving conditions.

All electronic and mechanical equipment, devices and machines sold by InterCyprus to EU countries are CE certified and carry a two year warranty.

At intercyprus.com since 2002 — trusted for quality and reliability.