140W Battery Adapter With Type C Usb Charging And Led Display For Tools

Upgrade your job-site workflow with this 140W bidirectional battery adapter engineered for sustained tool readiness. Built around PD3.1 architecture with 28V 5A input and output capabilities, the device charges compatible 18V lithium-ion packs roughly 40 percent faster than standard chargers while simultaneously functioning as a high-efficiency power bank. This dual capability removes the downtime usually caused by dead tool batteries or distant wall outlets, keeping impact drivers, drills, and work lights cycling without interruption. The front-mounted LED panel continuously tracks remaining capacity, real-time voltage, and active charging stages, giving you precise control over power allocation whether you are in a workshop or out on remote assignments.

Benefits & Practical Tips

• Use the bidirectional Type-C port to rapidly refill your pack battery before installation, then switch to powered-up mode to charge tablets, headlamps, or communication devices directly from the same tool battery.
• Place the compact housing inside a secondary toolbox compartment or backpack mesh pocket to maintain a lightweight mobile power station that fits easily into existing EDC or contractor setups.
• Perform a brief connection test before heavy-duty applications to verify stable current delivery and optimal thermal dissipation during prolonged charging cycles.

Technical Specifications

• Maximum Output Power: 140W
• Fast Charge Standard: PD3.1 with 28V 5A input/output
• Interface Ports: One Type-C connector combined with one USB-A port
• Monitoring System: Real-time LED display reporting battery percentage, operating voltage, and charge progress
• Unit Dimensions: 3.7 x 2.3 x 1.5 inches
• Supported Batteries: Fully compatible with Makita 18V models including BL1850B, BL1860B, BL1840B, and BL1820B, as well as Milwaukee M18 series codes 48-11-1850, 48-11-1852, 48-11-1862, 48-11-1880, 48-11-1812, and 48-11-1820
• Primary Applications: Accelerated tool battery replenishment, distributed worksite power routing, and off-grid equipment support

Package Includes:

• One 140W Battery Adapter with integrated Type-C and USB-A charging interfaces
• Integrated LED diagnostic module
• Installation and operation guidelines

Usage Notes & Safety Reminders

This unit functions exclusively as a charging adapter and requires you to supply your own compatible 18V lithium-ion battery for normal operation. Please be aware that manufacturing tolerances allow a dimensional variance of up to 3 centimeters, which does not impact electrical performance or structural integrity. Operate the device using standard electrical safety protocols, keep contact pins free of debris, and store the adapter in a dry environment when transporting between locations.

All electronic and mechanical equipment, devices and machines sold by InterCyprus to EU countries are CE certified and carry a two year warranty.

Partnering with skilled trades for dependable power infrastructure since 2002 through intercyprus.com — delivering consistent performance exactly when your project demands it.