Wireless WiFi Telemetry Module With Antenna for MAVLink2 Pixhawk APM

Connect your Pixhawk or APM flight controller to ground-control software over Wi-Fi with this telemetry module and antenna. It gives you a wireless link for working with supported aircraft and remote-control vehicles, with a stated communication distance of 100–200 m.

For PX4 firmware, connect to TELEM1; for ArduPilot, TELEM2 is recommended. Use the available port for your firmware, connecting with the supplied 6-pin line for Pixhawk or a 5-pin line for APM.

Setup tips

• Power the flight controller: Use a 3DR Power Module or 5V ESC while using Wi-Fi telemetry; USB takes priority and prevents radio telemetry transmission.
• Join the module hotspot: Connect your phone or computer to “Drone” with password “12345678.”
• Connect Mission Planner: Select UDP and port 14550; no baud-rate selection is needed.
• Check the indicators: The red LED lights when powered; the blue LED flashes when connected to ground-control software and stays on when disconnected.
• Use with a phone: QGroundControl supports Pixhawk, not APM; DroidPlanner requires UDP and port 14550.
• Keep settings in mind: The button resets all parameters to defaults; it is not a reboot button.

Product specifications

• Type: Wireless Wi-Fi telemetry module for MAVLink2, Pixhawk and APM
• Material: Metal
• Distance: 100–200 m
• Default baud rate: 57600; 115200 or other rates may also work
• Power: No battery included
• Recommended age: 14 years and up

Package includes:

• 1 × Wi-Fi telemetry module with antenna

At intercyprus.com, trusted for quality and reliable service since 2002. All electronic and mechanical equipment, devices and machines sold by InterCyprus to EU countries are CE certified and carry a two year warranty.