6-in-1 Wall Detector and Stud Finder with LCD Screen for Wood, Metal, Wires

POROMETISTO DSF01 6-in-1 Wall Detector and Stud Finder with LCD Screen locates wood studs, metal, and live AC wires behind walls, ceilings, and floors, helping you drill safely and precisely.

This 6-in-1 device detects ferrous and non-ferrous metals, wood studs, and live AC cables, letting you position anchors, TVs, and cabinets with confidence. It offers two wood-stud finding modes—Exact for precise drilling and Deep for locating studs behind thicker surfaces such as drywall or coated walls. Calibration can be Auto or Manual, giving you quick setup or precise control as needed. The large LCD shows scan mode, detection depth, signal strength, battery level, and center point, while the indicator lights and beep guide you to the target.

Ergonomically designed for comfortable handling, the device protects walls with a soft back and a grip that stays steady at any angle. It supports safe mounting in home projects—behind walls, floors, or ceilings—to avoid nails, screws, or wires. Maximum depths: Ferrous metals ≤120 mm, Non-ferrous metals ≤100 mm, Live AC wires ≤50 mm; Wood studs: Exact ≤20 mm, Deep ≤38 mm. Operating conditions: −10 to 50°C, 35–55% relative humidity; automatic shutdown after about 5 minutes of inactivity. Power comes from 1×9V battery (not included).

All electronic and mechanical equipment, devices and machines sold by InterCyprus to EU countries are CE certified and carry a two year warranty.

At intercyprus.com since 2002 — trusted for quality and reliability.

Benefits & Tips

• Before mounting, scan the wall to locate studs for secure, flush fittings and to avoid hidden wires.
• Use Exact mode for precise drilling on thin surfaces; switch to Deep mode when working through thicker sheathing.
• If AC wires aren’t detected in a given area, try switching to Metal mode to confirm the presence of metal behind the wall.

Product specifications

• Model: DSF01
• 6-in-1: detects ferrous metals, non-ferrous metals, wood studs, and live AC wires
• Modes: Auto calibration (lift for auto) and Manual calibration
• Display: Large LCD with signal strength, depth, center point, and battery indicator
• Indicator: Three status lights and beep alarm
• Wood studs: Exact ≤20 mm; Deep ≤38 mm
• Metal detection depths: Ferrous ≤120 mm; Non-ferrous ≤100 mm
• Live AC wires: ≤50 mm
• Unit conversion: Inch/cm
• Operating temperature: −10 to 50°C
• Storage temperature: −20 to 70°C
• Operating humidity: 35–55% RH
• Power: 1×9V battery (not included)
• Automatic shutdown: After ~5 minutes of no operation

Package includes:

• 1x POROMETISTO DSF01 6-in-1 Wall Detector

Warnings / reminders

• Battery not included; requires 1×9V battery.
• If AC wire mode yields inconsistent readings, thin wires or PVC shielding may affect results—switch to metal mode for verification.
• Automatic shutdown occurs after ~5 minutes of inactivity to preserve battery life.