Home » Nano V3.0 ATmega328P Microcontroller Board,Nano Board CH340G Chip 5V 16MHz with 245 mm USB Cable for Arduino

Nano V3.0 ATmega328P Microcontroller Board,Nano Board CH340G Chip 5V 16MHz with 245 mm USB Cable for Arduino

Only 2 left
Free shipping for all orders with value over €70.00
Everything stocked in Cyprus for fast delivery to your door in 1 - 2 working days.
Tested for quality and endurance from selected manufactures worldwide.
2 years warranty backed by technical and telephone assistance within Cyprus. 21 years of uninterrupted online sales services .
€9,99 inc. VAT
  • 【Small UNO Module for Arduino】It is a smallest, complete, and breadboard friendly board. It has everything that Arduino/Genuino UNO has (electrically) with more analog input pins and onboard +5V AREF jumper
  • 【More Breadboard Space】Nano's got the breadboard-ability of the Board and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other)
  • 【Specification】The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source
  • 【Usage】 The Nano is designed for Arduino programming
  • 【 User Manual 】https://drive.google.com/open?id=1zQND4YpWXsN8QYLOQlnSpqwcdfccqqgN; Before running the procedure, pls install the corresponding computer system driver.

  • Product description

     

    Features:

    1. The pins have been welded, you don't need to solder it by yourself
    2. This is a compact and breadboard-friendly board based on the ATmega328P and it works with a mini USB cable

    3. It can be powered via USB connection, 6-12 V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27).

    4. It has a variety of facilities for communicating with a PC or other micro-controllers.

    5. It can be reset by software running on the connected computer


    Specification:

    Operating Voltage: 5 V

    Input Voltage: (recommended) 7 V-12 V

    Input Voltage: (limits) 6 V-20 V

    Digital I/O Pins: 14 (of which 6 provide PWM output)

    Analog Input Pins: 8

    DC Current per I/O Pin: 40 mA

    DC Current for 3.3V Pin: 50 mA

    Flash Memory 32 KB (ATmega328) of which 2 KB used by boothloader

    SRAM: 2 KB

    EEPROM: 1 KB

    Clock Speed: 16 MHz

    Dimention: Approx. 45 x 17 x 19 mm

    Cable Length: 245 mm


    Package:
    1* Nano V3.0 Board
    1* Mini USB Cable
    •