Home » Stop-Start Engine System Eliminator Switch for Toyota Land Cruiser Prado J150

Stop-Start Engine System Eliminator Switch for Toyota Land Cruiser Prado J150

SKU: 1005009355897625-Default Title
Default Title
€20,93
-37% €33,48 €20,93

Protect your Toyota Land Cruiser Prado J150's engine components and battery efficiency with this dedicated stop-start system eliminator tailored for 2018 to 2021 production years. This plug-and-play module integrates into the existing steering column circuitry to automatically set the automatic start-stop function to the OFF position by default after each ignition cycle. Drivers benefit from uninterrupted engine operation during idling and stop-and-go traffic, eliminating the vibration, noise, and potential starter wear associated with continuous factory restart sequences.

Critical Fitment Requirement: This device requires the original factory steering column to include a visible OFF button associated with the start-stop system. If the vehicle lacks this specific button configuration, this product is incompatible.

Key Benefits & Practical Tips

  • Simplified Driving Routine: Once installed and configured, the start-stop function remains deactivated automatically, removing the necessity to locate and press the manual switch every time you drive.
  • Battery Longevity: By preventing high-frequency activation cycles, the modification reduces discharge stresses that commonly contribute to premature battery replacement intervals.
  • Flexible Override: While the system defaults to disabled, the driver retains full control; pressing the lever button momentarily reactivates the factory start-stop logic for specific scenarios requiring it.

Technical Specifications

  • Manufacturer: STPLRGECP Choice
  • Application: Toyota Land Cruiser Prado J150 (J150 chassis)
  • Model Years: 2018, 2019, 2020, 2021
  • Action: Modulates engine auto start-stop behavior to default OFF
  • Connection Type: Inline connector harness fitting behind factory panel
  • Setup Protocol: Configuration achieved via brake pedal hold and timed ignition sequence
  • Status Indicator: Button illuminates red automatically upon successful initialization
  • Weight: 36 g
  • Origin: Mainland China

Package Includes

  • One (1) Stop-Start Elimination Cable Harness
  • Trim Panel Removal Tool

Installation & Configuration Notes

This product serves as a hardware-based memory keeper for your vehicle's settings. Installation involves carefully releasing the steering column panel clips to access the rear factory socket, then inserting the provided harness between the original plug and the button base. After securing the connections and reassembling the panel, turn the ignition on and press the brake pedal firmly. Maintain pressure without touching any other buttons for a duration of 3 to 6 seconds; the start-stop lever indicator will glow red, confirming that the default shutdown state has been programmed. All electronic and mechanical equipment, devices and machines sold by InterCyprus to EU countries are CE certified and carry a two year warranty.

Trusted provider of reliable automotive solutions for drivers worldwide since 2002 at intercyprus.com.