Gold Thermal Exhaust Tape Heat Insulation Wrap With Self Adhesive 2 Inch Roll

Protect your engine bay and exhaust pathways with the Gold Thermal Exhaust Tape, a reflective heat insulation wrap engineered to manage extreme under‑hood temperatures. Constructed from a metalized polyamide polymer surface laminated over reinforcing fiberglass and aluminum foil, this 2‑inch roll shields sensitive components like wiring harnesses, plastic clips, and rubber hoses while bouncing radiant heat away from the cabin floor and firewall. The built‑in high‑temperature pressure‑sensitive adhesive bonds securely to clean metal or painted surfaces without requiring clamps, rivets, or gap spacing, making it an efficient thermal upgrade for cars, motorcycles, boats, and heavy equipment.

Benefits & Practical Tips

• Targeted Heat Reduction: Wrap exhaust flanges, turbo piping, or bulkheads to lower ambient bay temperatures and improve cabin comfort without adding weight.
• Curve‑Friendly Application: When wrapping radii like downpipes or seat mounts, cut shorter strips and score shallow relief slits in the adhesive side to prevent buckling and maintain full surface contact.
• Surface Preparation Matters: Degrease the mounting area with isopropyl alcohol and allow it to dry completely; firm, even pressure applied right after peeling the release liner ensures maximum bond retention.

Product Specifications

• Core Material: Reinforced fiberglass matrix with aluminum foil backing
• Outer Finish: Metalized polyamide polymer (Gold & Silver tones)
• Standard Width: 2 inches (approximately 5 cm)
• Available Lengths: 5 meters or 10 meters per roll
• Thermal Limits: Continuous exposure up to 200°C / Recommended operating temperature up to 150°C
• Features: Waterproof, corrosion resistant, lightweight, self‑adhesive, zero clearance required

Package includes:

• 1 × Gold Thermal Exhaust Heat Shield Tape Roll (select 2" x 5M or 2" x 10M configuration)

Installation & Safety Notes

For optimal results, remove loose debris, gently sand glossy factory finishes, and align the tape starting from flat outer edges toward tighter sections. After installation, reassemble surrounding components carefully to avoid pinching the wrap. This shield is rated for high‑heat airflow and exhaust proximity; keep it clear of moving drive belts, sharp rotating edges, and open flame sources. Ensure complete drying time before exposing the bonded surface to water or car washes.

All electronic and mechanical equipment, devices and machines sold by InterCyprus to EU countries are CE certified and carry a two year warranty.

Delivering proven heat management parts and dependable customer support at intercyprus.com since 2002.