Motorcycle USB Charger 72W Dual Port Type-C PD QC3.0 With Voltmeter

Eliminate mid-ride dead zones with a dedicated 72W dual-port motorcycle USB charger built for 12V to 24V electrical systems. This hardwired unit delivers rapid power to smartphones, GPS navigation, and dashcams while continuously tracking your vehicle's battery status through an integrated digital monitor. The rugged ABS housing carries an IP65 waterproof rating, keeping critical contacts safe from dust, spray, and road debris. Two mounting configurations allow quick setup on handlebars or flat fairings, making it a straightforward upgrade for motorcycles, ATVs, and tricycles.

Benefits & Practical Tips

• Simplify Your Gear Stash: The built-in retractable Type-C cable slides neatly into the housing to prevent tangles and keeps charging access ready without extra adapters.
• Avoid Unexpected Power Loss: Monitor the live voltage readout during short stops; the unit alerts you if system voltage drops toward 12V, prompting timely battery maintenance before you risk a hard shutdown.
• Optimize Simultaneous Charging: When both the USB-A and USB-C ports are active, the system balances output to 5V at a combined 3.4A rate, ensuring stable performance rather than throttling individual devices.

Product Specifications

• Total Rated Power: 72W
• USB-A Output: 5V/3A, 9V/2A, 12V/1.5A (Max 18W)
• USB-C Port / Retractable Cable: 5V/3A, 9V/3A, 12V/2.5A (Max 30W each)
• Dual-Port Configuration: Auto-switches to 5V/3.4A combined flow
• Voltage Range: DC 5–30V display (Designed for 12–24V vehicles)
• Fast Charging Protocols: Qualcomm QC2.0/QC3.0, PD 3.0 (PPS), Apple BC1.2, Samsung AFC, Huawei FCP/SCP, Spreadtrum SFCP
• Construction & Protection: High-grade ABS shell, IP65 water resistance, Smart IC safeguards against short circuits, overheating, and overcharging
• Monitoring Interface: English-labeled LCD with standard Volts (V) readout

Package Includes

• 1 × Dual-port motorcycle USB charger with LED voltmeter
• 1 × Integrated retractable Type-C charging cable
• 1 × Mounting hardware set (handlebar clamp & flat-surface screws)
• 1 × Direct-wire connector harness with color-coded leads

Warnings & Installation Reminders

This charger requires direct hardwire connection to your vehicle's electrical system. Always connect the red wire to the battery positive terminal (+) and the black wire to the negative terminal (-) before activation. Reversing polarity can damage the internal Smart IC module. The IP65 seal withstands heavy splashing and dusty conditions but should not be submerged. Gently guide the retractable cord to its full extension to protect the internal spring mechanism. For optimal reliability, route the wiring away from hot exhaust components and sharp metal edges.

All electronic and mechanical equipment, devices and machines sold by InterCyprus to EU countries are CE certified and carry a two year warranty.

Honest sourcing and steady stock levels have kept intercyprus.com a trustworthy destination for rider essentials since 2002.