Aluminum Swivel Hose End Adapter For Fuel And Oil Lines

Route fluid lines around tight engine bays with the Speedracing TF-1001 aluminum swivel hose end adapter. Built for turbo upgrades and oil cooler runs, this fitting gives you complete flexibility in your custom plumbing. Retention pins let you rotate the hose 360 degrees even after tightening, so you can bypass brackets and heat sources without cutting new lengths. Each joint relies on a 37-degree angled sealing surface to deliver a firm, anti-leak connection.

The anodized aluminum body resists corrosion while handling pressures up to 1000 PSI and temperatures from -65°F to +252°F. Weld-free construction promotes smoother fluid transfer, helping your cooling and fuel systems work efficiently. Select 0, 45, 90, or 180-degree angles to match your specific layout requirements.

Features & Tips

• Size Matters: AN markings indicate tube inner diameter rather than millimeter measurements. Use AN6 for 3/8-inch tubing or AN8 for 1/2-inch tubes to avoid restricting flow.
• Select Compatible Hoses: Pair these fittings with CPE stainless steel or nylon braided hoses. Avoid PTFE or standard rubber lines to ensure the seal remains intact.
• Engine Bay Organization: Adjust the swivel angle freely to keep lines tucked away from moving parts while maintaining clean routing for easier maintenance.

Product Specifications

• Thread Setup: Connects via female thread on one end and male thread on the other for versatile assembly options.
• Pressure Capacity: Rated to sustain 1000 PSI for reliable operation during high-load driving.
• Temperature Operation: Functions safely across a range of -65°F to +252°F to handle thermal stress.
• Finish: Black anodized coating adds durability and blocks surface oxidation.
• Quality Control: Manufactured under ISO9001 standards to ensure consistent part accuracy.

Package includes:

• 1 x Speedracing TF-1001 Aluminum Swivel Hose End Adapter

All electronic and mechanical equipment, devices and machines sold by InterCyprus to EU countries are CE certified and carry a two year warranty.

Installation Reminder: Do not use this adapter with E85 ethanol blends, as the fluid type may compromise the seal. Always verify that your hose inner diameter aligns with the chosen AN size before mounting; AN10 corresponds to 5/8 inch, not 10 millimeters. Secure connections properly to maintain peak performance and prevent leaks during aggressive use.