433Mhz DC12V 1CH Wireless Remote Control Switch Relay Receiver Module + 2 RF Transmitter
Review: 5 - "A masterpiece of literature" by , written on May 4, 2006
I really enjoyed this book. It captures the essential challenge people face as they try make sense of their lives and grow to adulthood.

433Mhz DC12V 1CH Wireless Remote Control Switch Relay Receiver Module + 2 RF Transmitter

Available: In Stock
Wishlist Compare
€14,76
  • Order within
NOTE: 
 
The system can store for 15pcs of remotes, if the remote get more than 15pcs, the initial remote control will be lost.

Feature:
 
Wiring type: fixed terminal
Standby current: <5MA
Input power: DC10V-14V
RF frequency: 433Mhz
Receive sensitivity: >97dbm
Output terminal: NO, NC, COM
RF working mode: Superheterodyne
Decoding mode: MCU software decoding
Transmitting distance: >100m ( open space)
Support remote type: Learning code, Fixed code(Rolling code can be design)
Working mode: Momentary, Toggle, Latching Time delay (5s, 10s, 15s )
 
About Working mode:
 
- Momentary: Push the remote button, the relay connects, release the remote button, the relay disconnects.
- Toggle: Push once the remote button, the relay connects, push twice the remote button, the relay disconnects.
- Latching: Push the remote button A, the relay connects, push the remote button B, the relay dis-connect.
- Time delay mode: Push the remote control button, the relay connects, from when releasing the remote button, after 5s or 10s or 15s, the relay disconnect automatically.
 
Clearing the code:
 
Push the learning button on the receivers for 8 times, the codes will be cleaned.
After clearing the code, all the remote control cannot work anymore.
 
1. Learning the code: (Momentary)
Push the learning key on the receiver once time, it comes into the momentary setting mode.
Wait for a moment, the LED will be off , it comes into learning state.
Push the remote button, LED indicator on the receiver board will flash then come off.
After 3 seconds, the LED indicator will be on again, learning successfully.
 
2. Learning the code: ( Toggle )
Push the learning key on the receiver twice, it comes into toggle setting mode
Wait for a moment, the LED will be off, it comes into learning state.
Push the remote button, LED indicator on the receiver board will flash then come off.
After 3 seconds , the LED indicator will be on again , learning successfully.
 
3. Learning the code: ( Latching )
Note: When you choose for latching mode, in order to learn more remote control, you need to learn two different button, the first time learned is for "ON", the second time learned for "OFF".
For example: button A = ON , button B = OFF
Push the learning key on the receiver triple time, it comes into latching mode.
Wait for a moment, the LED indicator on the receiver board will flash then come off.
Push the remote button A.
LED flash for 5 times.
Push the remote button B.
LED flash for 5 times.
After 3 seconds, the LED indicator will be on again , learning successfully.
A = ON , B = OFF.
 
4. Learning the code: (Time delay mode )
Push the learning key on the receiver forth time, the time delay for 5 seconds.
Push the learning key on the receiver fifth time , the time delay for 10 seconds.
Push the learning key on the receiver sixth time, the time delay for 15 seconds.
The LED indicator will be off .
Push the remote button, LED flashes and off.
After 3 seconds , the LED indicator will be on again, learning successfully.
 
Package included:
 
2 x Remote Control Transmitters (including battery)
1 x Remote Receiver Module (including Shell)
 
Notes:
 
1. Manual measuring, please allow 1 ~ 3mm error, thank you.
2. Due to the difference between different monitors, the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the picture.
NOTE:    The system can store for 15pcs of remotes, if the remote get more than 15pcs, the initial remote control will be lost.
Feature:
 
Wiring type: fixed terminal Standby current: <5MA Input power: DC10V-14V RF frequency: 433Mhz Receive sensitivity: >97dbm Output terminal: NO, NC, COM RF working mode: Superheterodyne Decoding mode: MCU software decoding Transmitting distance: >100m ( open space) Support remote type: Learning code, Fixed code(Rolling code can be design) Working mode: Momentary, Toggle, Latching Time delay (5s, 10s, 15s )   About Working mode:   - Momentary: Push the remote button, the relay connects, release the remote button, the relay disconnects. - Toggle: Push once the remote button, the relay connects, push twice the remote button, the relay disconnects. - Latching: Push the remote button A, the relay connects, push the remote button B, the relay dis-connect. - Time delay mode: Push the remote control button, the relay connects, from when releasing the remote button, after 5s or 10s or 15s, the relay disconnect automatically.   Clearing the code:   Push the learning button on the receivers for 8 times, the codes will be cleaned. After clearing the code, all the remote control cannot work anymore.   1. Learning the code: (Momentary) Push the learning key on the receiver once time, it comes into the momentary setting mode. Wait for a moment, the LED will be off , it comes into learning state. Push the remote button, LED indicator on the receiver board will flash then come off. After 3 seconds, the LED indicator will be on again, learning successfully.   2. Learning the code: ( Toggle ) Push the learning key on the receiver twice, it comes into toggle setting mode Wait for a moment, the LED will be off, it comes into learning state. Push the remote button, LED indicator on the receiver board will flash then come off. After 3 seconds , the LED indicator will be on again , learning successfully.   3. Learning the code: ( Latching ) Note: When you choose for latching mode, in order to learn more remote control, you need to learn two different button, the first time learned is for "ON", the second time learned for "OFF". For example: button A = ON , button B = OFF Push the learning key on the receiver triple time, it comes into latching mode. Wait for a moment, the LED indicator on the receiver board will flash then come off. Push the remote button A. LED flash for 5 times. Push the remote button B. LED flash for 5 times. After 3 seconds, the LED indicator will be on again , learning successfully. A = ON , B = OFF.   4. Learning the code: (Time delay mode ) Push the learning key on the receiver forth time, the time delay for 5 seconds. Push the learning key on the receiver fifth time , the time delay for 10 seconds. Push the learning key on the receiver sixth time, the time delay for 15 seconds. The LED indicator will be off . Push the remote button, LED flashes and off. After 3 seconds , the LED indicator will be on again, learning successfully.   Package included:   2 x Remote Control Transmitters (including battery) 1 x Remote Receiver Module (including Shell)   Notes:   1. Manual measuring, please allow 1 ~ 3mm error, thank you. 2. Due to the difference between different monitors, the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the picture.

Shipping

Locally we ship via courier services. For orders for overseas  please contact our sales department before placing an order for an offer on shipping cost.

 

Returns and Refunds

We have a 7-day return policy, which means you have 7 days after receiving your item to request a return.

To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.

To start a return, you can contact us at sales@intercyprus.com. If your return is accepted, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.

You can always contact us for any return question at sales@intercyprus.com.


Damages and issues
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.


Exceptions / non-returnable items
Certain types of items cannot be returned, like perishable goods (such as food, flowers, or plants), custom products (such as special orders or personalized items), and personal care goods (such as beauty products). We also do not accept returns for hazardous materials, flammable liquids, or gases. Please get in touch if you have questions or concerns about your specific item.

Unfortunately, we cannot accept returns on sale items or gift cards.


Exchanges
The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item.


Refunds
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method. Please remember it can take some time for your bank or credit card company to process and post the refund too.

  • Fast Delivery
    24-48 hours for stoked items
  • 7 Days
    For Free Return
  • Secure Payments
    Paypal or COD
  • Only Best
    Brands